Перейти к основному содержанию

Введение

The vacuum comes with three hose attachments. To clean or remove blockages from hose attachments, it may be necessary to remove the hose and wand attachments.

  1. Place the vacuum upright and locate the nozzle attachment you want removed.
    • Place the vacuum upright and locate the nozzle attachment you want removed.

  2. PC Laptop Batteries

    An easy fix for a big power boost.

    Купить сейчас

    PC Laptop Batteries

    An easy fix for a big power boost.

    Купить сейчас
  3. Slide the attachment off of the end of the wand. Slide the attachment off of the end of the wand.
    • Slide the attachment off of the end of the wand.

  4. The brush nozzle attachment has two parts, which can be separated and replaced. The front of the vacuum has slots to hold up to two vacuum attachments. To store, simply place the attachment in the framed slots.
    • The brush nozzle attachment has two parts, which can be separated and replaced.

    • The front of the vacuum has slots to hold up to two vacuum attachments. To store, simply place the attachment in the framed slots.

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Jorden Carroll

Участник с: 18.01.2018

227 Репутация

1 Guide authored

Команда

Cal Poly, Team S12-G1, Banghart Winter 2018 Member of Cal Poly, Team S12-G1, Banghart Winter 2018

CPSU-BANGHART-W18S12G1

5 членов

Автор 5 руководств

Один комментарий

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 1

За всё время: 59