Введение

This installation guide will help you separate the blades from the blender jar. Once separated, you can successfully install replacements blades or to check for any malfunctions with the blades.

Make sure the blender is turned off and unplugged from all power.
  • Make sure the blender is turned off and unplugged from all power.

  • Remove the glass jar from the base of the blender.

Добавить комментарий

Remove the top lid from the blender jar.
  • Remove the top lid from the blender jar.

Добавить комментарий

Twist the plastic base of the jar counterclockwise to remove it from the glass upper half.
  • Twist the plastic base of the jar counterclockwise to remove it from the glass upper half.

  • Take care not to cut yourself on the blades.

Добавить комментарий

Lift the rubber washer straight up to remove it from the blade assembly.
  • Lift the rubber washer straight up to remove it from the blade assembly.

  • Take care not to cut yourself on the blades.

Добавить комментарий

Lift the blades from the bottom cap.
  • Lift the blades from the bottom cap.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Andrew

Участник с: 04.10.2012

170 Репутация

Автор 4 руководств

Команда

Cal Poly, Team 6-34, Regan Fall 2012 Member of Cal Poly, Team 6-34, Regan Fall 2012

CPSU-REGAN-F12S6G34

4 членов

Автор 6 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 4

За 7 дней: 11

За 30 дней: 54

За всё время: 2,887