Перейти к основному содержанию

Black and Decker JS660 Blade Holder Replacement

Выберете то, что вам нужно

  1. Black and Decker JS660 Blade Holder Replacement, Housing Disassembly: шаг 1, изображение 1 из 2 Black and Decker JS660 Blade Holder Replacement, Housing Disassembly: шаг 1, изображение 2 из 2
    • Remove the nine torx 15.875mm screws on the front of the jigsaw using a T-15 torx screwdriver.

  2. Black and Decker JS660 Blade Holder Replacement: шаг 2, изображение 1 из 1
    • By separating the two housing halves, carefully remove the top plate.

  3. Black and Decker JS660 Blade Holder Replacement, Blade Holder: шаг 3, изображение 1 из 1
    • Being careful to keep all parts together, grab the entire assembly and pull it directly out of the saw.

Заключение

To reassemble your device, follow these instructions in reverse order.

matt murray

Участник с: 01/27/17

682 Репутация

Автор 6 руководств

Команда

Cal Poly, Team 22-9, Maness Winter 2017 Участник Cal Poly, Team 22-9, Maness Winter 2017

CPSU-MANESS-W17S22G9

4 членов

Автор 7 руководств

Один комментарий

Why dose it keep throw the blade off

Delores Torres - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 4

За последние 30 дней: 26

За всё время: 3,468