Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Запчасти

Детали не указаны.

  1. Remove the battery cover and battery before continuing.
    • Remove the battery cover and battery before continuing.

    • Remove the six T6 Torx screws on the back of the phone.

    • Make sure to keep the screws somewhere that they will not get lost.

  2. Using your finger nail or a spudger, carefully pry up the back cover.
    • Using your finger nail or a spudger, carefully pry up the back cover.

    • Begin in one spot and slowly circle around the device as you pry up all of the back cover.

  3. Lift off the back cover.
    • Lift off the back cover.

  4. Remove the two T6 screws.
    • Remove the two T6 screws.

  5. Remove the daughterboard. Remove the exposed vibration motor.
    • Remove the daughterboard.

    • Remove the exposed vibration motor.

Заключение

To reassemble your device, follow these instructions in reverse order.

Nick Alejandro

Участник с: 24.01.2010

3 Репутация

1 руководство автора

Команда

Cal Poly, Team 14-44, Regan Winter 2010 Участник Cal Poly, Team 14-44, Regan Winter 2010

CPSU-REGAN-W10S14G44

4 членов

Автор 8 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 2

За последние 30 дней: 3

За всё время: 2,469