Введение

Disassembling the logic board in the rear of the Blackberry allows you to get to the LCD screen and keypad.

Запчасти

Никакие детали не требуются.

Turn the phone upside down.
  • Turn the phone upside down.

  • Push down on the black button on the back of the phone to slide the rear panel off.

  • The battery should be visible now.

Добавить комментарий

Hold the BlackBerry in one hand face-up with the screen facing towards you.
  • Hold the BlackBerry in one hand face-up with the screen facing towards you.

  • Gently smack the phone against your hand to dislodge the battery.

Добавить комментарий

  • Use a T6 Torx screwdriver to remove the 6 screws holding the rear of the phone.

Добавить комментарий

  • Use a pick or small tool to push the clips holding the rear away from you.

  • Applying too much pressure could break the plastic clips and permanently damage your Blackberry.

Добавить комментарий

  • Repeat the process of unlatching the clips for the top section of the Blackberry.

Добавить комментарий

  • Slide the rear panel forward to reveal the logic board.

Добавить комментарий

  • Remove the indicated screws using a T6 Torx screwdriver.

Добавить комментарий

  • Remove the logic board.

  • Remove the indicated screw using the T6 Torx screwdriver.

Добавить комментарий

  • Pull the metal plate away from the front panel of the cell phone.

Добавить комментарий

  • Place the faceplate face-down and the interior of the phone face-up, as shown.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Nathan

Участник с: 18.01.2010

31 Репутация

Автор 7 руководств

Команда

Cal Poly, Team 5-7, Forte Winter 2010 Member of Cal Poly, Team 5-7, Forte Winter 2010

CPSU-FORTE-W10S5G7

5 членов

Автор 7 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 2

За всё время: 3,351