Введение

Replacing the water valve should it fail to work.

Запчасти

Никакие детали не требуются.

Remove the two 12mm black Phillips screws using a Phillips #0 screwdriver. Reminder for reassembly; This bottom piece is first to be screwed back on. Reminder for reassembly; This bottom piece is first to be screwed back on.
  • Remove the two 12mm black Phillips screws using a Phillips #0 screwdriver.

  • Reminder for reassembly; This bottom piece is first to be screwed back on.

Добавить комментарий

Remove the two 12mm Phillips screws using a Phillips #0 screwdriver.
  • Remove the two 12mm Phillips screws using a Phillips #0 screwdriver.

Добавить комментарий

Remove the grey plastic casing. Remove the two 12mm hexagonal screws using a 1.5mm hex screwdriver. Remove the two 12mm hexagonal screws using a 1.5mm hex screwdriver.
  • Remove the grey plastic casing.

  • Remove the two 12mm hexagonal screws using a 1.5mm hex screwdriver.

Добавить комментарий

Cut the band connecting the hose to the water valve.
  • Cut the band connecting the hose to the water valve.

  • Remove the water valve.

  • Reminder for reassembly; You will need a new band to tie the hose back to the water valve.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Antonio

Участник с: 26.09.2012

73 Репутация

Автор 6 руководств

Команда

Cal Poly, Team 1-3, Propen Fall 2012 Member of Cal Poly, Team 1-3, Propen Fall 2012

CPSU-PROPEN-F12S1G3

4 членов

Автор 6 руководств

Один комментарий

Where can I buy a new water valve assembly? Are they custom to the device or generally available ? Thanks!

Betsy Goodrich - Ответить

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 6

За 30 дней: 36

За всё время: 4,128