Перейти к основному содержанию

Введение

In this step we will be removing the rear casing from the sewing machine. This is necessary to access the inside components of the machine.

Запчасти

No parts specified.

  1. Place the machine on a solid surface.
    • Place the machine on a solid surface.

    • Remove the 14mm Phillips #2 screw holding on the face cover.

  2. Remove the two 14mm Phillips #2 screws and two 22mm Phillips #2 screws that secure the rear casing.
    • Remove the two 14mm Phillips #2 screws and two 22mm Phillips #2 screws that secure the rear casing.

  3. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    Купить сейчас

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    Купить сейчас
  4. Lay the machine on its side.
    • Lay the machine on its side.

    • Remove the four 10mm Phillips #2 screws that hold the bottom panel in place.

    • The feet will come off with the screws.

  5. Remove the bottom panel.
    • Remove the bottom panel.

  6. Place the machine upright.
    • Place the machine upright.

    • Remove the rear casing.

    • You may have to wiggle the panel and pull at the same time.

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Allison

Участник с: 03.02.2014

239 Репутация

Автор 2 руководств

Команда

Cal Poly, Team 2-12, Amido Winter 2014 Member of Cal Poly, Team 2-12, Amido Winter 2014

CPSU-AMIDO-W14S2G12

4 членов

Автор 6 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 2

За 7 дней: 13

За 30 дней: 144

За всё время: 2,078