Введение

Damaged presserfoot? It is easy to replace and this guide will take you through the necessary steps.

Make sure the presser foot is in the up position.
  • Make sure the presser foot is in the up position.

  • The switch should be up, not in the vertical position.

Добавить комментарий

Adjust the needle to the top of its stroke using the hand wheel.
  • Adjust the needle to the top of its stroke using the hand wheel.

Добавить комментарий

Lift the arm on the back of the presser foot assembly to release the foot. Lift the arm on the back of the presser foot assembly to release the foot.
  • Lift the arm on the back of the presser foot assembly to release the foot.

Добавить комментарий

Remove the presser foot.
  • Remove the presser foot.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Kevin Bickers

Member since: 05.02.2014

577 Репутация

Автор 4 руководств

Команда

Cal Poly, Team 2-12, Amido Winter 2014 Member of Cal Poly, Team 2-12, Amido Winter 2014

CPSU-AMIDO-W14S2G12

4 членов

Автор 6 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 4

За 30 дней: 11

За всё время: 736