Введение
This guide will show you the steps necessary to deconstruct and replace the circuit board for this part.
Выберете то, что вам нужно
-
-
Insert a nylon or metal spudger under the plastic CHI spring covers. Pry them up to pop them off. Do this for each side.
-
-
-
-
Remove the spring pin with a pair of pliers or tweezers.
-
Remove the spring.
-
-
-
Remove the (2) .27" Phillips head screws on each half of the CHI Original.
-
-
-
Desolder all points of contact between the circuit board and wires on the ceramic heating elements.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
Еще один человек закончил это руководство.
Команда
IUPUI, Team S1-G2, Freund Fall 2017 Участник IUPUI, Team S1-G2, Freund Fall 2017
IUPUI-FREUND-F17S1G2
4 членов
Автор 3 руководств
