Перейти к основному содержанию

Введение

Over time the tripod mount can become damaged and the tripod will no longer thread into the camera. This guide will explain how to replace the tripod mount.

  1. Turn the camera so the bottom of the camera is facing up.
    • Turn the camera so the bottom of the camera is facing up.

    • Remove the two Phillips screws from the bottom cover using the Phillips #00 Screwdriver.

  2. Lift and remove the bottom cover from the camera.
    • Lift and remove the bottom cover from the camera.

  3. Комплект инструментов для замены батареи Macbook

    Доступно с $69.99

    Buy Now

    Комплект инструментов для замены батареи Macbook

    Доступно с $69.99

    Buy Now
  4. Remove the three screws securing  the tripod mount using the Phillips #00 Screwdriver.
    • Remove the three screws securing the tripod mount using the Phillips #00 Screwdriver.

  5. Lift and remove the tripod mount from the camera.
    • Lift and remove the tripod mount from the camera.

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Ben Barber

Участник с: 04.10.2011

408 Репутация

Автор 2 руководств

Команда

UW Stout, Team 5-1, Zhou Fall 2011 Member of UW Stout, Team 5-1, Zhou Fall 2011

UWSTOUT-ZHOU-F11S5G1

3 членов

Автор 4 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 1

За 7 дней: 4

За 30 дней: 46

За всё время: 5,094