Перейти к основному содержанию

Введение

Use this guide to replace the battery door on your Canon EOS 40D.

Инструменты

Инструменты не указаны.

Запчасти

  1. After removing the battery, place your index finger between the inner section of the battery door and the battery compartment as shown in the photo.
    • After removing the battery, place your index finger between the inner section of the battery door and the battery compartment as shown in the photo.

    • Then place your thumb slightly above the battery door hinge.

  2. With your thumb, gently press down on the battery door and rotate the battery door clockwise. The upper hinge will pop out and then the lower hinge will pop out. With your thumb, gently press down on the battery door and rotate the battery door clockwise. The upper hinge will pop out and then the lower hinge will pop out.
    • With your thumb, gently press down on the battery door and rotate the battery door clockwise. The upper hinge will pop out and then the lower hinge will pop out.

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Doug Kruse

Участник с: 03.09.2015

715 Репутация

Автор 3 руководств

Команда

USF Tampa, Team 12-3, Blackwell Fall 2015 Участник USF Tampa, Team 12-3, Blackwell Fall 2015

USFT-BLACKWELL-F15S12G3

4 членов

Автор 14 руководств

Комментариев: 105

fhdfhdfhdfhdgfhfghfghffgjgfjfgfhdffhdfhdfhdfhdgfhfghfghffgjgfjfgfhdf

cyberov50 - Ответить

fhdfhdfhdfhdgfhfghfghffgjgfjfgfhdf

cyberov50 - Ответить

fhdfhdfhdfhdgfhfghfghffgjgfjfgfhdffhdfhdfhdfhdgfhfghfghffgjgfjfgfhdf

cyberov50 - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 19

За всё время: 1,358