Введение

This guide will take you through the steps required to change your screen and get a clear view of your picture.

Clean the broken or cracked screen as best as possible.
  • Clean the broken or cracked screen as best as possible.

  • Place the suction cup on the damaged screen.

Добавить комментарий

While holding the suction cup flat against the camera screen, suction the two together by pinching the orange handles to meet at the center.
  • While holding the suction cup flat against the camera screen, suction the two together by pinching the orange handles to meet at the center.

Добавить комментарий

  • Grab the handle of the suction cup and gently lift it up at an angle, as demonstrated in the picture.

  • Remove the plastic screen from the camera.

  • Release the broken screen by pulling down the lever of the suction cup.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Michael Peck

Участник с: 14.04.2014

134 Репутация

1 Guide authored

Команда

Cal Poly, Team 3-41, Maness Spring 2014 Member of Cal Poly, Team 3-41, Maness Spring 2014

CPSU-MANESS-S14S3G41

4 членов

Автор 5 руководств

Один комментарий

Be sure to measure the size of your screen before buying the suction cups. I got the heavy-duty ones and then found that they were too big for my Rebel T1i screen.

cmorris - Ответить

Добавить комментарий

Просмотр статистики:

За 24 часа: 1

За 7 дней: 8

За 30 дней: 43

За всё время: 3,453