Введение

Take out old, dead batteries. Then replace them with new ones.

Place the camera so the battery cover is facing up, as shown in the picture. Gently push on the outer battery cover until you hear a click, and then release.
  • Place the camera so the battery cover is facing up, as shown in the picture.

  • Gently push on the outer battery cover until you hear a click, and then release.

Добавить комментарий

To open the inner battery cover, push down on the grey latch until you hear a click, and then release. Remove the dead batteries from the camera.
  • To open the inner battery cover, push down on the grey latch until you hear a click, and then release.

  • Remove the dead batteries from the camera.

Добавить комментарий

After removing the batteries, insert the new batteries in the proper direction.
  • After removing the batteries, insert the new batteries in the proper direction.

  • Now push the black, inner cover down until you hear a click to secure the batteries in place.

  • Push down and forward on the outer cover to secure the latch. Your camera will now be fully charged.

Добавить комментарий

Заключение

Congratulations, you're done.

Ellen Chambers

Участник с: 05.01.2011

231 Репутация

Автор 2 руководств

Команда

Cal Poly, Team 7-37, Regan Winter 2011 Member of Cal Poly, Team 7-37, Regan Winter 2011

CPSU-REGAN-W11S7G37

4 членов

Автор 5 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 8

За всё время: 1,601