Перейти к основному содержанию

Canon PowerShot A2300 Front Cover Replacement

Выберете то, что вам нужно

  1. Canon PowerShot A2300 Front Cover Replacement, Front Cover: шаг 1, изображение 1 из 1
    • Open the A/V Out Digital port cover on the function button side to reveal a screw.

  2. Canon PowerShot A2300 Front Cover Replacement: шаг 2, изображение 1 из 3 Canon PowerShot A2300 Front Cover Replacement: шаг 2, изображение 2 из 3 Canon PowerShot A2300 Front Cover Replacement: шаг 2, изображение 3 из 3
    • Remove all 6 screws(2.70 mm), 2 on each side and 2 on the bottom.

    • Screws are small and very easily lost.

  3. Canon PowerShot A2300 Front Cover Replacement: шаг 3, изображение 1 из 2 Canon PowerShot A2300 Front Cover Replacement: шаг 3, изображение 2 из 2
    • Open the card/battery latch by sliding the cover away from the camera in the direction indicated by the arrow.

    • Doing this gives a spot to grip on the bottom of the front cover. This will make it easier to handle when removing.

  4. Canon PowerShot A2300 Front Cover Replacement: шаг 4, изображение 1 из 1
    • Gently lift the bottom of the front cover to roughly a 30 degree angle.

  5. Canon PowerShot A2300 Front Cover Replacement: шаг 5, изображение 1 из 1
    • Pull the top of the front cover away from the camera by gripping the top of the front cover by the corners where the cover is still attached to the body.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Ashley Fincher

Участник с: 03/23/15

477 Репутация

Автор 3 руководств

Команда

Baylor, Team 7-14, Williams Spring 2015 Участник Baylor, Team 7-14, Williams Spring 2015

BU-WILLIAMS-S15S7G14

4 членов

Автор 10 руководств

Один комментарий

Are the screws really hard to remove, or is it just me?

Alex Hulinsky - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 2

За последние 30 дней: 6

За всё время: 525