Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Введение

This guide demonstrates how to remove and replace the battery pack.

  1. Turn the camera with the bottom side facing up. Locate the panel labeled "Batt. Open"
    • Turn the camera with the bottom side facing up.

    • Locate the panel labeled "Batt. Open"

    • Place your finger on the panel and slide it in the direction of the arrow.

    • The slot will swing open revealing the battery pack.

  2. Rotate the camera so that the slot is horizontal.
    • Rotate the camera so that the slot is horizontal.

    • Pull the orange lever and the battery will spring out slightly.

  3. Grasp battery and fully pull out of slot
    • Grasp battery and fully pull out of slot

    • When placing the new battery back in the slot, the arrow on the battery must align with the arrow on the camera.

Заключение

After a new battery has been inserted, close the swinging door and you're done.

Randy Lormand

Участник с: 23.01.2011

331 Репутация

Автор 3 руководств

Команда

Cal Poly, Team 11-27, Maness Winter 2011 Участник Cal Poly, Team 11-27, Maness Winter 2011

CPSU-MANESS-W11S11G27

4 членов

Автор 7 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 1

За всё время: 1,376