Запчасти

Никакие детали не требуются.

  1. Remove the two screws from the side panel closest to the camera lens. Note: These screws are 2.9 mm long.
    • Remove the two screws from the side panel closest to the camera lens.

    • Note: These screws are 2.9 mm long.

  2. Remove the two screws from the camera bottom panel.
    • Remove the two screws from the camera bottom panel.

    • Note: These screws are 2.9 mm long.

  3. Remove the 2 screws from the side panel farthest from the lens.
    • Remove the 2 screws from the side panel farthest from the lens.

    • Note: These screws are 2.9 mm long.

  4. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  5. Pull the back panel away from the camera body, starting at the end with the function buttons.
    • Pull the back panel away from the camera body, starting at the end with the function buttons.

  6. Remove the small cover panel and attached wrist strap mount.
    • Remove the small cover panel and attached wrist strap mount.

  7. Remove the front cover by gently pulling it away from the camera body.
    • Remove the front cover by gently pulling it away from the camera body.

  8. Place the front cover, back cover, and wrist strap mount in a safe place until you are ready for reassembly.
    • Place the front cover, back cover, and wrist strap mount in a safe place until you are ready for reassembly.

Заключение

To reassemble your device, follow these instructions in reverse order.

Phillip Phung

Участник с: 19.01.2012

486 Репутация

Автор 9 руководств

Команда

Cal Poly, Team 8-18, Maness Winter 2012 Member of Cal Poly, Team 8-18, Maness Winter 2012

CPSU-MANESS-W12S8G18

4 членов

Автор 10 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 1

За 30 дней: 2

За всё время: 1,030