Перейти к основному содержанию

Canon PowerShot SD850 IS Housing Replacement

Архивированное руководство
Это руководство сохранено для исторических целей. Используйте его обновлённую версию, чтобы выполнить ремонт.

Выберете то, что вам нужно

  1. Canon PowerShot SD850 IS Housing Replacement, Housing: шаг 1, изображение 1 из 3 Canon PowerShot SD850 IS Housing Replacement, Housing: шаг 1, изображение 2 из 3 Canon PowerShot SD850 IS Housing Replacement, Housing: шаг 1, изображение 3 из 3
    • To avoid severe electric shock do not remove or tamper with internal camera flash components. An electrical capacitor is attached to the flash that can discharge if contact is made.

    • Remove the two side screws, indicated by the red circles, using a Phillips #00 screwdriver.

    • Remove the screw in the battery port, indicated by the blue circle, again using a Phillips #00 screwdriver.

    • Remove the front face by gently peeling the housing away from the camera.

  2. Canon PowerShot SD850 IS Housing Replacement: шаг 2, изображение 1 из 3 Canon PowerShot SD850 IS Housing Replacement: шаг 2, изображение 2 из 3 Canon PowerShot SD850 IS Housing Replacement: шаг 2, изображение 3 из 3
    • Remove the back face by using a spudger to lift the tab highlighted in yellow

    • Pivot the back face clockwise as seen in the second photo.

  3. Canon PowerShot SD850 IS Housing Replacement: шаг 3, изображение 1 из 2 Canon PowerShot SD850 IS Housing Replacement: шаг 3, изображение 2 из 2
    • Remove the A/V port cover [no tools are necessary]

Заключение

To reassemble your device, follow these instructions in reverse order.

iDeleted

Участник с: 07/07/10

2 101 Репутация

Автор 39 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 6

За последние 30 дней: 10

За всё время: 851