Перейти к основному содержанию

Canon Powershot SD880 Front Cover Replacement

Выберете то, что вам нужно

  1. Canon Powershot SD880 Front Cover Replacement, Back Cover: шаг 1, изображение 1 из 3 Canon Powershot SD880 Front Cover Replacement, Back Cover: шаг 1, изображение 2 из 3 Canon Powershot SD880 Front Cover Replacement, Back Cover: шаг 1, изображение 3 из 3
    • Remove the two 2.4 mm screws on the side of the camera that are next to the LCD screen using a Phillips #00 screwdriver.

    • Remove the two 4.1 mm screws on the other side using a Phillips #00 screwdriver.

    • One screw will be located under the rubber USB flap.

    • Remove the single 2.6 mm screw from the bottom of the camera using a Phillips #00 screwdriver.

    • Slowly pull the back cover off of the camera.

  2. Canon Powershot SD880 Front Cover Replacement, Front Cover: шаг 2, изображение 1 из 3 Canon Powershot SD880 Front Cover Replacement, Front Cover: шаг 2, изображение 2 из 3 Canon Powershot SD880 Front Cover Replacement, Front Cover: шаг 2, изображение 3 из 3
    • Remove the 2.6 mm screw from the bottom of the camera using a Phillips #00 screwdriver.

    • Remove the 4.1 mm screw from the menu button side of the camera using a Phillips #00 screwdriver.

    • The two screws on the other side of the camera were already removed when the back cover was taken off.

Заключение

To reassemble your device, follow these instructions in reverse order.

Robert Manno

Участник с: 01/05/11

432 Репутация

Автор 4 руководств

Команда

Cal Poly, Team 13-3, Forte Winter 2011 Участник Cal Poly, Team 13-3, Forte Winter 2011

CPSU-FORTE-W11S13G3

5 членов

Автор 8 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 3

За всё время: 2,788