Перейти к основному содержанию

Canon Powershot SX500 IS Battery Replacement

  1. Canon Powershot SX500 IS Battery Replacement, Battery: шаг 1, изображение 1 из 1
    • Rotate the camera to expose the underside of the camera.

  2. Canon Powershot SX500 IS Battery Replacement: шаг 2, изображение 1 из 1
    • Slide the rounded rectangle tab to the left to release the battery cover.

  3. Canon Powershot SX500 IS Battery Replacement: шаг 3, изображение 1 из 1
    • Push the small orange tab forward to release the battery (Battery is ready for removal).

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Jody Wilkerson

Участник с: 04/07/15

565 Репутация

Автор 4 руководств

Команда

Eastern Washington University, Team 1-4, Plummer Spring 2015 Участник Eastern Washington University, Team 1-4, Plummer Spring 2015

EWU-PLUMMER-S15S1G4

4 членов

Автор 6 руководств

2 Комментариев

Simple & to the point. One would think manufacturers would hop on-board recruiting others like yourself.

Will check your site for other "ifixits". (Completely unsolicited).

Jim

Jim Brennan - Ответить

Hi guys, I have a Canon SX500 IS and I jumped inside the swimming pool with its original battery by mistake so it was wet and decided to buy another battery after 4 years and put back on but it's still not switching on

I need some advice guys please what should I do?

Lwazi - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 4

За последние 30 дней: 9

За всё время: 1,130