Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Введение

This guide shows how to remove the back case of the camera to replace a damaged back case or access the inner parts of the camera.

Запчасти

Детали не указаны.

  1. Locate 12 screws. Four on the left, four on the right, and four on the bottom. Locate 12 screws. Four on the left, four on the right, and four on the bottom. Locate 12 screws. Four on the left, four on the right, and four on the bottom.
    • Locate 12 screws. Four on the left, four on the right, and four on the bottom.

  2. Using the #00 Phillips screwdriver, remove the four 3.66mm screws from the bottom outer case, and the eight 1.75mm screw from the sides of the case.
    • Using the #00 Phillips screwdriver, remove the four 3.66mm screws from the bottom outer case, and the eight 1.75mm screw from the sides of the case.

  3. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  4. Separate the front case from the body of the camera.
    • Separate the front case from the body of the camera.

  5. Separate the back case from the body of the camera.
    • Separate the back case from the body of the camera.

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Laura

Участник с: 19.04.2012

31 Репутация

Автор 2 руководств

Команда

Cal Poly, Team 9-45, Regan Spring 2012 Участник Cal Poly, Team 9-45, Regan Spring 2012

CPSU-REGAN-S12S9G45

7 членов

Автор 6 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 5

За всё время: 445