Перейти к основному содержанию

Check for OBD2 codes, ABS, DTC without a scanner

Выберете то, что вам нужно

    • Turn ignition two clicks to the ON position

    • Insert a bent paperclip into the SCC connector. (See video for where the SCC connector is located)

    • Touch both of the exposed pins to short the connection. Continue to short the connection for more than 5 seconds.

    • Any codes will display on the Odometer/Trip display, or "NO" if there are no stored codes

    • Remove paperclip and wait 10 seconds

    • Turn ignition OFF and remove key

Финишная черта

ndsol

Участник с: 11/11/10

2 890 Репутация

Автор 16 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 10

За последние 30 дней: 63

За всё время: 2,974