Skip to main content

Введение

Disassembly guide for Cisco Aironet 1242ag Access Point

Инструменты

Запчасти

No parts specified.

  1. The equipment cover is held by 4 screws. The equipment cover is held by 4 screws.
    • The equipment cover is held by 4 screws.

  2. Once the 4 screws are removed, push to the side to remove the cover.
    • Once the 4 screws are removed, push to the side to remove the cover.

  3. Android Fix Kits

    A new screen or battery is one kit away.

    Купить сейчас

    Android Fix Kits

    A new screen or battery is one kit away.

    Купить сейчас
  4. The card is attached to the bottom plate by 4 screws Before removing the logic board, disconnect the antenna cables in both parts of the device. There is a total of 4 cables. Use a tweezer or a spudger to disconnect them.
    • The card is attached to the bottom plate by 4 screws

    • Before removing the logic board, disconnect the antenna cables in both parts of the device.

    • There is a total of 4 cables. Use a tweezer or a spudger to disconnect them.

  5. Write the wisdom here. Write the wisdom here. Write the wisdom here.
    • Write the wisdom here.

Итог

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Особая благодарность этим переводчикам:

100%

These translators are helping us fix the world! Хотите внести свой вклад?
Начните переводить ›

Прикрепленные документы

Eneider Colina

Участник с: 20.09.2013

1 444 Reputation

Автор 9 руководств

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 11

All Time: 332