Перейти к основному содержанию

Cleaning the Fan Blades

Выберете то, что вам нужно

  1. Cleaning the Fan Blades, PCB (Printed Circuit Board): шаг 1, изображение 1 из 1
    • Use the Phillips #2 screwdriver to remove the four 6 mm screws by unscrewing counterclockwise.

  2. Cleaning the Fan Blades: шаг 2, изображение 1 из 1
    • Pull the front and back cover apart.

    • Be careful not to pull the front cover off completely. It holds the wires.

  3. Cleaning the Fan Blades: шаг 3, изображение 1 из 1
    • Remove the Phillips 6 mm screw that holds the circuit board to the outer shell of the fan.

    • Shock warning: Make sure the fan is unplugged before removing the circuit board.

  4. Cleaning the Fan Blades: шаг 4, изображение 1 из 1
    • Remove the top cover containing the circuit board and the wires by pulling it away from the outer shell of the fan.

  5. Cleaning the Fan Blades: шаг 5, изображение 1 из 2 Cleaning the Fan Blades: шаг 5, изображение 2 из 2
    • Remove the screws from the four corners of the circuit board.

    • Remove the circuit board from the top cover.

    • Do not touch the other side of the circuit board to avoid damaging the circuit elements.

  6. Cleaning the Fan Blades, Fan Blades: шаг 6, изображение 1 из 1
    • Follow steps 1-4 to remove the front, back, and top covers of the fan to reach the fan blades.

    • Use a cloth to clean off dust clogged in between the fan blades.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Vivian Fong

Участник с: 09/26/12

97 Репутация

1 руководство автора

Команда

Cal Poly, Team 15-46, Forte Fall 2012 Участник Cal Poly, Team 15-46, Forte Fall 2012

CPSU-FORTE-F12S15G46

5 членов

Автор 6 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 3

За последние 30 дней: 24

За всё время: 9,961