Введение

If you want to change not working Hard Disk Drive (HDD) or you want to upgrade it, this manual will help you to do this.


Please SUBSCRIBE to my channel ツ

Video Overview

Remove the battery. Remove the RAM Memory Cover. Remove the HDD Cover.
  • Remove the battery.

  • Remove the RAM Memory Cover.

  • Remove the HDD Cover.

Remove the 4x screws and take out the HDD. Disconnect the SATA cable. The Hard Drive is held in the HDD Caddy by 4x screws.
  • Remove the 4x screws and take out the HDD.

  • Disconnect the SATA cable.

  • The Hard Drive is held in the HDD Caddy by 4x screws.

  • .

  • Did you do it successfully?

  • .

  • Please SUBSCRIBE to my channel ツ

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

4 участников успешно повторили данное руководство.

ZFix

Member since: 09.12.2013

150 379 Репутация

Автор 424 руководств

Команда

Master Techs Member of Master Techs

Community

274 членов

Автор 713 руководств

Комментариев: 2

SSDs may not work. Tried two different ones already on one of these (a Crucial and an A-Data), and no luck. Not sure if it has to do with missing BIOS/UEFI options, or a whitelist of parts in said firmware.

Michael Adams - Ответить

thanks for this info!

Michael Auß -

Добавить комментарий

Просмотр статистики:

За 24 часа: 3

За 7 дней: 20

За 30 дней: 116

За всё время: 6,445