Введение

This guide will detail how to replace the RAM in a CQ60-211DX.

Запчасти

Никакие детали не требуются.

  1. Power off the CQ60 and unplug all cables connected to it.
    • Power off the CQ60 and unplug all cables connected to it.

  2. Using a standard #2 Phillips-head screwdriver, remove the back compartment of the CQ60 to access the motherboard.
    • Using a standard #2 Phillips-head screwdriver, remove the back compartment of the CQ60 to access the motherboard.

  3. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  4. Use your fingers to push the retention clips away from the RAM sticks, and carefully pull out the old RAM.
    • Use your fingers to push the retention clips away from the RAM sticks, and carefully pull out the old RAM.

  5. Carefully insert the new RAM, and ensure that it is placed in the correct slots.
    • Carefully insert the new RAM, and ensure that it is placed in the correct slots.

Заключение

To reassemble your device, follow these instructions in reverse order.

Garrett Carter

Участник с: 21.09.2018

471 Репутация

Автор 4 руководств

Команда

University of North Texas, Team S2-G3, Riccardelli Fall 2018 Member of University of North Texas, Team S2-G3, Riccardelli Fall 2018

UNT-RICCARDELLI-F18S2G3

4 членов

Автор 4 руководств

Комментариев: 0

Просмотр статистики:

За 24 часа: 1

За 7 дней: 1

За 30 дней: 5

За всё время: 92