Введение

If your dryer isn't turning on, the back of the On/Off button that engages the power may be broken.

Запчасти

Никакие детали не требуются.

  1. Unscrew the two 18 mm long Phillips #2 screws on the side of the hair dryer.
    • Unscrew the two 18 mm long Phillips #2 screws on the side of the hair dryer.

  2. Some pieces may fall out when removing the face of the handle.
    • Some pieces may fall out when removing the face of the handle.

    • Once you have taken the screws out, take the top half of the handle off by lifting it off of the dryer.

    • Now take out the On/Off switch by gently pulling it out towards you and lightly pushing it to the right with your finger until it comes out of the groove it is resting in.

    • Once the new switch is in place you can put the dryer back together.

Заключение

To reassemble your device, follow these instructions in reverse order.

Candace

Участник с: 23.01.2014

884 Репутация

Автор 7 руководств

Команда

Cal Poly, Team 10-33, Maness Winter 2014 Member of Cal Poly, Team 10-33, Maness Winter 2014

CPSU-MANESS-W14S10G33

3 членов

Автор 7 руководств

Комментариев: 2

Looks to me that a replacement switch would be required. How can obtain one?

Jaky Felix - Ответить

“No parts required” is what’s displayed by default when there’s no link to an actual part for sale—it’’s a bit silly and clearly incorrect in this case. For hard-to-find parts, check eBay or Amazon. Also, a lot of folks with multiple broken units use these guides to cobble together one working unit from the parts. Good luck!

Jeff Suovanen -

Просмотр статистики:

За 24 часа: 1

За 7 дней: 5

За 30 дней: 31

За всё время: 1,703