Введение
This guide demonstrates how to replace the trigger/switch on the Crain 775 Jamb Saw.
Выберете то, что вам нужно
-
-
Use a Phillips #2 screwdriver to remove the eight screws securing the saw housing:
-
Four 20 mm screws
-
Two 50 mm screws
-
Two 55 mm screws
-
-
-
-
Use a Phillips #2 screwdriver to loosen the four screw terminals securing the power cord and motor wires.
-
-
-
Remove the power cord wires from the main switch.
-
Почти готово!
To reassemble your device, follow these instructions in reverse order.
Заключение
To reassemble your device, follow these instructions in reverse order.
