Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Введение

If your Crock-Pot Express Crock Multi-Cooker does not seal properly, use this guide to replace your bobber valve.

Инструменты

Инструменты не указаны.

Запчасти

  1. Orient the crock pot where the lid locked and unlocked icons are visible. Grasp the handle firmly and turn the lid clockwise until the arrow and the lid unlocked icon are facing each other. Remove the lid.
    • Orient the crock pot where the lid locked and unlocked icons are visible.

    • Grasp the handle firmly and turn the lid clockwise until the arrow and the lid unlocked icon are facing each other.

    • Remove the lid.

  2. Manta Driver Kit

    112 bits for every fix.

    Upgrade Your Toolbox

    Manta Driver Kit

    Upgrade Your Toolbox
  3. Flip the lid over and expose plastic washer.
    • Flip the lid over and expose plastic washer.

  4. Pull the plastic washer off the bobber valve and allow the bobber valve to fall out
    • Pull the plastic washer off the bobber valve and allow the bobber valve to fall out

Заключение

To reassemble your device, follow these instructions in reverse order.

3 участников успешно повторили данное руководство.

William Kelly

Участник с: 24.09.2018

718 Репутация

Автор 7 руководств

Комментариев: 2

Ok I followed your directions but the new valve just keeps calling out?

dpataky1952 - Ответить

First time I used this but the bobber valve ports steam and does not stop ( unit is brand new )

Archerkc - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 3

За последние 7 дней: 90

За последние 30 дней: 454

За всё время: 7,534