Введение
This guide shows how to recover a water-damaged DJI drone using safe disassembly, cleaning, and drying techniques. Whether your drone fell into a freshwater stream or saltwater bay, this step-by-step tutorial will help you attempt a successful restoration at home. The process covers the use of distilled water and isopropyl alcohol to flush contaminants, how to properly dry internal components, remove corrosion, and test your drone safely after the incident.
While the video features a general method, the techniques, tricks, and recommendations apply to any DJI drone model, including the DJI Mavic 2 Pro. Whether your drone crashed during flight, lost signal over water, or was accidentally submerged, this guide can help maximize your chances of recovery.
🔧 Key Takeaways:
- Works for both freshwater and saltwater incidents
- Safe disassembly and corrosion removal process
- Proper use of distilled water and isopropyl alcohol
- How to dry and reassemble your drone correctly
- Tips to prevent permanent damage or short circuits
Watch the full guide and give your drone a second chance!
⚠️ Important Note: Performing self-repair may void your DJI warranty. If your drone is still under warranty or covered by DJI Care Refresh, it’s highly recommended to contact DJI official support before attempting any repair yourself.
Видеоинструкции
To reassemble your device, follow these instructions in reverse order.
0 Комментарии к руководству