Введение
This guide will show you how to replace the black air filter cap located on the top of the motor.
Выберете то, что вам нужно
-
-
Using a T-20 hex head screw, unscrew the two screws located at the top and bottom of the black air filter. The screws are directly above and below the yellow lettering.
-
-
-
-
Use your hands to pull the black air filter away from the body of the saw to detach.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
Еще один человек закончил это руководство.
Команда
Cal Poly, Team 8-2, Banghart Winter 2017 Участник Cal Poly, Team 8-2, Banghart Winter 2017
CPSU-BANGHART-W17S8G2
3 членов
Автор 5 руководств
