Перейти к основному содержанию

DeWalt DW938 Switch VSR Replacement

Выберете то, что вам нужно

  1. DeWalt DW938 Switch VSR Replacement, Clam Shell: шаг 1, изображение 1 из 3 DeWalt DW938 Switch VSR Replacement, Clam Shell: шаг 1, изображение 2 из 3 DeWalt DW938 Switch VSR Replacement, Clam Shell: шаг 1, изображение 3 из 3
    • Use a torque bit screw driver to remove the T10 18.3 mm screw on the handle.

    • Use a torque bit screw driver to remove 6 T10 21.5 mm screws on the handle.

    • Insure power source is removed from tool.

    • Insure blade is removed from tool.

  2. DeWalt DW938 Switch VSR Replacement: шаг 2, изображение 1 из 1
    • Carefully cut the safety sticker with a blade along the seam.

  3. DeWalt DW938 Switch VSR Replacement: шаг 3, изображение 1 из 1
    • Remove the Clam Shell from the handle unit.

  4. DeWalt DW938 Switch VSR Replacement, Switch VSR: шаг 4, изображение 1 из 1
    • Lift the mechanical device off the pins of the clam shell.

  5. DeWalt DW938 Switch VSR Replacement: шаг 5, изображение 1 из 2 DeWalt DW938 Switch VSR Replacement: шаг 5, изображение 2 из 2
    • Remove the red and black trigger wires from the brush leads with the pliers.

  6. DeWalt DW938 Switch VSR Replacement: шаг 6, изображение 1 из 2 DeWalt DW938 Switch VSR Replacement: шаг 6, изображение 2 из 2
    • Remove the VSR trigger and the lock button.

Заключение

To reassemble your device, follow these instructions in reverse order.

Christopher Chin

Участник с: 03/08/17

316 Репутация

Автор 3 руководств

Команда

IUPUI, Team S4-G4, Baechle Spring 2017 Участник IUPUI, Team S4-G4, Baechle Spring 2017

IUPUI-BAECHLE-S17S4G4

4 членов

Автор 3 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 2

За всё время: 518