Перейти к основному содержанию

Запчасти

No parts specified.

  1. Flip the laptop on it's back, so that the bottom is facing up.
    • Flip the laptop on it's back, so that the bottom is facing up.

  2. Loosen the single Phillips #1 screw.
    • Loosen the single Phillips #1 screw.

    • This screw is attached to the panel and cannot be removed.

  3. Push the highlighted pin outward until the RAM pops slightly out of its socket. Place the new chip in at a slight angle, and push it in and downward until little or none of the gold contacts are visible. Not seating the new DIMMs correctly could cause the device to refuse to POST.
    • Push the highlighted pin outward until the RAM pops slightly out of its socket.

    • Place the new chip in at a slight angle, and push it in and downward until little or none of the gold contacts are visible.

    • Not seating the new DIMMs correctly could cause the device to refuse to POST.

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

May Chauvin

Участник с: 14.04.2011

201 Репутация

Автор 6 руководств

Команда

Cal Poly, Team 12-34, Maness Spring 2011 Member of Cal Poly, Team 12-34, Maness Spring 2011

CPSU-MANESS-S11S12G34

4 членов

Автор 6 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 3

За 7 дней: 4

За 30 дней: 9

За всё время: 3,855