Запчасти

Никакие детали не требуются.

  1. Flip to the back side of the laptop
    • Flip to the back side of the laptop

  2. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  3. Loosen one screw.
    • Loosen one screw.

    • This screw is attached to the panel and cannot be removed.

  4. Spread out pins on the opposite sides. The chip will spring up at an angle. Place new chip in at a 30 degree angle. Push inward until pins can't be seen.
    • Spread out pins on the opposite sides. The chip will spring up at an angle.

    • Place new chip in at a 30 degree angle.

    • Push inward until pins can't be seen.

    • Push RAM down, so it lays flat.

    • Improperly replacing the RAM will cause it to short-circuit.

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

May Chauvin

Участник с: 14.04.2011

201 Репутация

Автор 6 руководств

Команда

Cal Poly, Team 12-34, Maness Spring 2011 Member of Cal Poly, Team 12-34, Maness Spring 2011

CPSU-MANESS-S11S12G34

4 членов

Автор 6 руководств

Комментариев: 0

Просмотр статистики:

За 24 часа: 2

За 7 дней: 3

За 30 дней: 13

За всё время: 3,786