Выберете то, что вам нужно
-
-
Remove the battery and base cover from the computer.
-
-
-
Pry the securing clips away from the memory module until it pops up.
-
-
-
-
Remove the memory module from its connector on the system board by drawing the module from the system board at 45-degree angle.
-
Repeat steps 1 and 2 to add the second memory chip (module).
-
Почти готово!
To reassemble your device, follow these instructions in reverse order.
Заключение
To reassemble your device, follow these instructions in reverse order.
Команда
