Перейти к основному содержанию

Введение

The bottom plastic cover is held on by 10 JIS #0 screws with a head size of 3.93 mm and a length of 8.46 mm.

Запчасти

No parts specified.

  1. With the laptop closed and the bottom side facing up, slide the two battery latches towards the sides of the laptop. When the latches are unlocked, a small logo resembling an open padlock will become visible.
    • With the laptop closed and the bottom side facing up, slide the two battery latches towards the sides of the laptop.

    • When the latches are unlocked, a small logo resembling an open padlock will become visible.

  2. Grasp the battery from the top and pull upward. Grasp the battery from the top and pull upward.
    • Grasp the battery from the top and pull upward.

  3. Remove the ten 8.6 mm JIS #0 screws. Remove the ten 8.6 mm JIS #0 screws.
    • Remove the ten 8.6 mm JIS #0 screws.

  4. Place fingers underneath cover and pull off the cover.
    • Place fingers underneath cover and pull off the cover.

Заключение

To reassemble your device, follow these instructions in reverse order.

Alec Weiss

Участник с: 05.11.2018

752 Репутация

Автор 8 руководств

Команда

IUPUI, Team S2-G2, Baechle Fall 2018 Member of IUPUI, Team S2-G2, Baechle Fall 2018

IUPUI-BAECHLE-F18S2G2

3 членов

Автор 8 руководств

Добавить комментарий

Просмотр статистики:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 19

За всё время: 176