Перейти к основному содержанию
  1. Start by removing the 8 screws circled in red in the photo with the Philips # 0 screwdriver. Then, using the iFixit Opening Picks, lift up from the dock connector end. Unclip it gently. Then, using the iFixit Opening Picks, lift up from the dock connector end. Unclip it gently.
    • Start by removing the 8 screws circled in red in the photo with the Philips # 0 screwdriver.

    • Then, using the iFixit Opening Picks, lift up from the dock connector end. Unclip it gently.

  2. After removing the cover, locate the slots for RAM in the computer. There are 2 of them. Attention, only the DDR4 memory in portable format is compatible with the motherboard of this PC! Attention, only the DDR4 memory in portable format is compatible with the motherboard of this PC!
    • After removing the cover, locate the slots for RAM in the computer. There are 2 of them.

    • Attention, only the DDR4 memory in portable format is compatible with the motherboard of this PC!

Заключение

To reassemble your device, follow the instructions in reverse order.

3 участников успешно повторили данное руководство.

Особая благодарность этим переводчикам:

100%

These translators are helping us fix the world! Хотите внести свой вклад?
Начните переводить ›

Hyperion

Участник с: 13.12.2015

1 219 Репутация

Автор 3 руководств

Добавить комментарий

Просмотр статистики:

Past 24 Hours: 2

Past 7 Days: 16

Past 30 Days: 75

За всё время: 1,181