Запчасти

Никакие детали не требуются.

  1. Slide the battery release latch to the side. {2}
    • Slide the battery release latch to the side. {2}

      • Slide the battery out of the battery bay. {1}

    Добавить комментарий

  2. Loosen the ten captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.
    • Loosen the ten captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.

    Добавить комментарий

    • NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips.

    • Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.

      • Remove the module from the connector.

    Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Участник с: 28.02.2018

35 698 Репутация

Автор 408 руководств

Команда

Informative Technologies Inc. Member of Informative Technologies Inc.

Community

15 членов

Автор 925 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 1

За всё время: 14