Запчасти

Никакие детали не требуются.

  1. Loosen the M2.5x2+3.5 captive screws that secure the base cover to the computer [1]. Pry the base cover from the edge [2].
    • Loosen the M2.5x2+3.5 captive screws that secure the base cover to the computer [1].

    • Pry the base cover from the edge [2].

    • Lift the base cover away from the computer

  2. Disconnect the battery cable from the connector on the system board [1]. Remove the M2x3L screws that secure the battery to the computer [2].
    • Disconnect the battery cable from the connector on the system board [1].

    • Remove the M2x3L screws that secure the battery to the computer [2].

  3. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  4. Lift the latch and disconnect the hard drive cable from the computer [1].
    • Lift the latch and disconnect the hard drive cable from the computer [1].

    • Pry the hard drive cable to release from the adhesive [2].

  5. Remove the M2.5x5L screws that secure the hard drive to the computer [1].
    • Remove the M2.5x5L screws that secure the hard drive to the computer [1].

    • Lift the hard drive away from the computer [2].

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Johnathan Hammond

Участник с: 28.02.2018

35 786 Репутация

Автор 408 руководств

Команда

Informative Technologies Inc. Member of Informative Technologies Inc.

Community

15 членов

Автор 925 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 1

За 30 дней: 3

За всё время: 82