Перейти к основному содержанию

Dell XPS 12 9Q33 mSATA Card Replacement

Выберете то, что вам нужно

  1. Dell XPS 12 9Q33 mSATA Card Replacement, Removing the Battery: шаг 1, изображение 1 из 1
    • Slide the battery cable connector out of its system board socket.

    • Pull parallel to the motherboard, not straight up, or you will damage the socket.

    • Remove the screws that secure the battery to the palm-rest assembly.

    • Lift and remove the battery along with its cable.

    • Slide and hold the power switch for about five seconds to ground the system board.

  2. Dell XPS 12 9Q33 mSATA Card Replacement, Removing the mSATA card: шаг 2, изображение 1 из 1
    • Remove the screw that secures the mSATA card to the system board.

    • Slide and remove the mSATA card out of the mSATA-card connector.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Заключение

To reassemble your device, follow these instructions in reverse order.

3 участников успешно повторили данное руководство.

Johnathan Hammond

Участник с: 02/28/18

44 953 Репутация

Автор 408 руководств

Команда

RampUP America, Inc. Участник RampUP America, Inc.

Community

42 членов

Автор 1 989 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 5

За последние 30 дней: 10

За всё время: 379