Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Введение

If you are having trouble controlling the speed of the drill there may be a problem with your clutch. By following this guide you will learn how to replace it.

Запчасти

Детали не указаны.

  1. Grab the drill in one hand and cup the battery (located at the bottom of the drill) with the other hand.
    • Grab the drill in one hand and cup the battery (located at the bottom of the drill) with the other hand.

  2. Use your other hand to push down on the yellow button on the battery.
    • Use your other hand to push down on the yellow button on the battery.

  3. Pull the battery in a horizontal direction away from the drill.
    • Pull the battery in a horizontal direction away from the drill.

  4. Essential Electronics Toolkit

    Small Toolkit. Big Possibilities.

    Shop Toolkits

    Essential
    Electronics
    Toolkit

    Shop Toolkits
  5. Remove the eight 16 mm, Torx Security #15 screws. Remove the eight 16 mm, Torx Security #15 screws.
    • Remove the eight 16 mm, Torx Security #15 screws.

  6. Lay the drill on its side and gently lift the top half off it.
    • Lay the drill on its side and gently lift the top half off it.

  7. Lift drill mechanism from the drill assembly.
    • Lift drill mechanism from the drill assembly.

  8. Twist slightly and pull clutch away from motor. Remove clutch. Remove clutch.
    • Twist slightly and pull clutch away from motor.

    • Remove clutch.

Заключение

To reassemble your device, follow these instructions in reverse order.

Brittany

Участник с: 09.03.2019

621 Репутация

Автор 5 руководств

Команда

Casper College, Team S1-G5, Lareau Spring 2019 Участник Casper College, Team S1-G5, Lareau Spring 2019

CASC-LAREAU-S19S1G5

4 членов

Автор 5 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 10

За последние 30 дней: 28

За всё время: 187