Перейти к основному содержанию

Этот документ имеет более свежие изменения. Перейти к последней непроверенной версии.

Disassembling Brother PT-D200 Back of Device

Абсолютно необходимое руководство
Это руководство предназначено только для использования в качестве обязательного условия для других руководств. Оно не полностью само по себе.

Выберете то, что вам нужно

  1. Disassembling Brother PT-D200 Back of Device, Battery: шаг 1, изображение 1 из 1
    • Flip the device over and press down on the indication arrows located at the top center of the back cover and pull it open.

  2. Disassembling Brother PT-D200 Back of Device: шаг 2, изображение 1 из 1
    • Remove the six AAA batteries.

  3. Disassembling Brother PT-D200 Back of Device, Back of Device: шаг 3, изображение 1 из 1
    • Use the Helping Hand 1/4" screwdriver to unscrew the six 3/16" corner screws.

  4. Disassembling Brother PT-D200 Back of Device: шаг 4, изображение 1 из 1
    • Close the back cover and then flip the device over and separate the top half from the bottom half as shown.

    • Be gentle when lifting the top of the device, there is a ribbon cable attaching the two halves together.

Заключение

To reassemble your device, follow these instructions in reverse order.

[deleted]

Участник с: 01/24/14

301 Репутация

Автор 3 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 75