Перейти к основному содержанию

Введение

The outer casing covers the internal mechanisms of the camera.

Запчасти

No parts specified.

  1. Remove the 2 screws (2.41 mm long) on the side of the camera next to the LCD screen. Remove the 2 screws (4.08 mm) on the other side.  One is located under the rubber USB flap. Remove the last screw (2.59 mm) located on the bottom of the camera.
    • Remove the 2 screws (2.41 mm long) on the side of the camera next to the LCD screen.

    • Remove the 2 screws (4.08 mm) on the other side. One is located under the rubber USB flap.

    • Remove the last screw (2.59 mm) located on the bottom of the camera.

    • Slowly pull the back cover of the camera.

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Ben Tupas

Участник с: 13.01.2011

317 Репутация

Автор 3 руководств

Команда

Cal Poly, Team 13-3, Forte Winter 2011 Member of Cal Poly, Team 13-3, Forte Winter 2011

CPSU-FORTE-W11S13G3

5 членов

Автор 8 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 2

За всё время: 1,579