Перейти к основному содержанию

Canon Powershot SD880 Back Cover Replacement

Выберете то, что вам нужно

  1. Canon Powershot SD880 Back Cover Replacement, Back Cover: шаг 1, изображение 1 из 3 Canon Powershot SD880 Back Cover Replacement, Back Cover: шаг 1, изображение 2 из 3 Canon Powershot SD880 Back Cover Replacement, Back Cover: шаг 1, изображение 3 из 3
    • Remove the two 2.4 mm screws on the side of the camera that are next to the LCD screen using a Phillips #00 screwdriver.

    • Remove the two 4.1 mm screws on the other side using a Phillips #00 screwdriver.

    • One screw will be located under the rubber USB flap.

    • Remove the single 2.6 mm screw from the bottom of the camera using a Phillips #00 screwdriver.

    • Slowly pull the back cover off of the camera.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Ben Tupas

Участник с: 01/13/11

317 Репутация

Автор 3 руководств

Команда

Cal Poly, Team 13-3, Forte Winter 2011 Участник Cal Poly, Team 13-3, Forte Winter 2011

CPSU-FORTE-W11S13G3

5 членов

Автор 8 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 3

За всё время: 1,693