Введение

This is a disassembly guide for the face of the clock, useful in the case that the face requires: maintenance, replacement, or access to the interior parts.

Запчасти

Никакие детали не требуются.

Grasp the plastic cover and carefully pull straight back so that the clock cover dislodges from its housing.
  • Grasp the plastic cover and carefully pull straight back so that the clock cover dislodges from its housing.

  • If any additional assistance is required for this step, it is recommended to use the plastic opening tool to help pry the edges of the cover simultaneously or a suction cup if you cannot grip the rim.

Добавить комментарий

Using your fingers, grasp the point where the hands of the clock meet in the center and pull straight back until they dislodge from the motor.
  • Using your fingers, grasp the point where the hands of the clock meet in the center and pull straight back until they dislodge from the motor.

  • Be sure that you remove all three hands as well as the pin that connects them in this one step. This component should come out as a single piece.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Devin Gooding

Участник с: 20.01.2015

104 Репутация

1 Guide authored

Команда

USF Tampa, Team 19-1, Blackwell Winter 2015 Member of USF Tampa, Team 19-1, Blackwell Winter 2015

USFT-BLACKWELL-W15S19G1

4 членов

Автор 4 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 2

За всё время: 207