Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Запчасти

Детали не указаны.

  1. Find the battery and the battery tabs located on the bottom of the Compaq Mini. Find the battery and the battery tabs located on the bottom of the Compaq Mini.
    • Find the battery and the battery tabs located on the bottom of the Compaq Mini.

  2. Push the tabs inward and slide the battery out. Push the tabs inward and slide the battery out. Push the tabs inward and slide the battery out.
    • Push the tabs inward and slide the battery out.

  3. Unscrew the two screws on the bottom of the laptop covering the memory compartment. The screws are attached to the panel.
    • Unscrew the two screws on the bottom of the laptop covering the memory compartment.

    • The screws are attached to the panel.

  4. Push out side tabs.
    • Push out side tabs.

  5. OPEN ALL THE TABS

    RAM Upgrade Kits for Mac

    Shop Kits

    Enough RAM
    For All The Tabs

    Shop Kits
  6. Remove the rubber pads located on the corners of your Compaq Mini. There may be junk underneath it. This is residue left from the glue that held on the rubber pad. Just scrape it away to find the screw.
    • Remove the rubber pads located on the corners of your Compaq Mini.

    • There may be junk underneath it. This is residue left from the glue that held on the rubber pad. Just scrape it away to find the screw.

  7. Unscrew all the corner screws. There are four total, one under each rubber pad. Unscrew all the corner screws. There are four total, one under each rubber pad.
    • Unscrew all the corner screws. There are four total, one under each rubber pad.

  8. Unscrew the screw for the bottom case located in the RAM compartment. Unscrew the screw for the bottom case located in the RAM compartment.
    • Unscrew the screw for the bottom case located in the RAM compartment.

  9. Remove the three screws in the silver tabs at the back of the keyboard. The red circles show where they are located at the back of the base under the screen. Remove the three screws in the silver tabs at the back of the keyboard. The red circles show where they are located at the back of the base under the screen.
    • Remove the three screws in the silver tabs at the back of the keyboard. The red circles show where they are located at the back of the base under the screen.

  10. Remove the three screws.
    • Remove the three screws.

  11. Pull up on the tab. Pull up on the tab.
    • Pull up on the tab.

Заключение

To reassemble your device, follow these instructions in reverse order.

12 участников успешно повторили данное руководство.

alea

Участник с: 06.10.2010

1 366 Репутация

Автор 14 руководств

Команда

Cal Poly, Team 22-2, Maness Fall 2010 Участник Cal Poly, Team 22-2, Maness Fall 2010

CPSU-MANESS-F10S22G2

6 членов

Автор 20 руководств

Комментариев: 2

still cannot remove back of my compacq mini. i have taken all screws out as told but back refuses to part.

madudman - Ответить

still cannot remove back of my compact after removing all screws. are ther any more hidden clips ? mike

madudman - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 4

За последние 7 дней: 21

За последние 30 дней: 85

За всё время: 34,972