Перейти к основному содержанию

Этот документ имеет более свежие изменения. Перейти к последней непроверенной версии.

Disassembling Compaq Mini 110 Hard Drive

Выберете то, что вам нужно

  1. Disassembling Compaq Mini 110 Hard Drive, Battery: шаг 1, изображение 1 из 2 Disassembling Compaq Mini 110 Hard Drive, Battery: шаг 1, изображение 2 из 2
    • Locate the battery and the battery tabs on the bottom of the Compaq Mini.

  2. Disassembling Compaq Mini 110 Hard Drive: шаг 2, изображение 1 из 3 Disassembling Compaq Mini 110 Hard Drive: шаг 2, изображение 2 из 3 Disassembling Compaq Mini 110 Hard Drive: шаг 2, изображение 3 из 3
    • Push both tabs inward simultaneously and slide the battery out.

  3. Disassembling Compaq Mini 110 Hard Drive, RAM: шаг 3, изображение 1 из 2 Disassembling Compaq Mini 110 Hard Drive, RAM: шаг 3, изображение 2 из 2
    • Use a Philips #0 screwdriver to unscrew the two screws covering the memory compartment on the bottom of the laptop and remove the cover.

  4. Disassembling Compaq Mini 110 Hard Drive: шаг 4, изображение 1 из 1
    • Push out the side tabs simultaneously and pull out the old RAM module.

    • When inserting a new RAM stick, be sure to evenly insert the gold pins in the same orientation that the old module was removed. While sliding the module in, press the side tabs in place.

  5. Disassembling Compaq Mini 110 Hard Drive, Keyboard: шаг 5, изображение 1 из 2 Disassembling Compaq Mini 110 Hard Drive, Keyboard: шаг 5, изображение 2 из 2
    • Remove the rubber pads located on the corners of your Compaq Mini.

    • There may be junk underneath it. This is residue left from the glue that held on the rubber pad. Just scrape it away to find the screw.

  6. Disassembling Compaq Mini 110 Hard Drive: шаг 6, изображение 1 из 2 Disassembling Compaq Mini 110 Hard Drive: шаг 6, изображение 2 из 2
    • Unscrew all the corner screws. There are four total, one under each rubber pad.

  7. Disassembling Compaq Mini 110 Hard Drive: шаг 7, изображение 1 из 2 Disassembling Compaq Mini 110 Hard Drive: шаг 7, изображение 2 из 2
    • Unscrew the screw for the bottom case located in the RAM compartment.

  8. Disassembling Compaq Mini 110 Hard Drive: шаг 8, изображение 1 из 2 Disassembling Compaq Mini 110 Hard Drive: шаг 8, изображение 2 из 2
    • Remove the three screws in the silver tabs at the back of the keyboard.

    • These are located at the back of the base under the screen.

    • Lift the keyboard away from the laptop.

  9. Disassembling Compaq Mini 110 Hard Drive, Hard Drive: шаг 9, изображение 1 из 1
    • Remove the three screws.

  10. Disassembling Compaq Mini 110 Hard Drive: шаг 10, изображение 1 из 2 Disassembling Compaq Mini 110 Hard Drive: шаг 10, изображение 2 из 2
    • Pull up on the tab.

Заключение

To reassemble your device, follow these instructions in reverse order.

15 участников успешно повторили данное руководство.

alea

Участник с: 10/06/10

1 405 Репутация

Автор 14 руководств

Команда

Cal Poly, Team 22-2, Maness Fall 2010 Участник Cal Poly, Team 22-2, Maness Fall 2010

CPSU-MANESS-F10S22G2

6 членов

Автор 20 руководств

2 Комментариев

still cannot remove back of my compacq mini. i have taken all screws out as told but back refuses to part.

madudman - Ответить

still cannot remove back of my compact after removing all screws. are ther any more hidden clips ? mike

madudman - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 5

За последние 7 дней: 16

За последние 30 дней: 50

За всё время: 38,746