Введение

The lower bracket needs to be removed to get to some components of the laptop.

Запчасти

Никакие детали не требуются.

Unscrew the 20 Phillips screws on the underside of the T42.
  • Unscrew the 20 Phillips screws on the underside of the T42.

    • For ease of reassembly, keep your screws organized.

Добавить комментарий

Unscrew the 2 Phillips screws on both sides of the T42's rear.
  • Unscrew the 2 Phillips screws on both sides of the T42's rear.

leave these four screws alone. No need to remove them.

fredwb - Ответить

Of course you need to remove them you Dingbat! They are the main anchors of the screen hinges, Doh!

wbcam -

There are tiny numbers showing the lengths of the screws. 1-2-3-4 where 1 is the shortest.

The dark red circles are not very easy to see. How about white ones?

mattikaki - Ответить

  • Flip the laptop over and open the screen.

    • The bezel and keyboard will be loose, be careful.

Добавить комментарий

  • Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.

    • Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.

Добавить комментарий

  • The metal bracket will now be free to move, grasp it and remove it from the device.

Добавить комментарий

  • Remove the small rubber piece that is covering the T42's microphone,

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Gerald Watanabe

Участник с: 14.04.2010

180 Репутация

Автор 7 руководств

Команда

Cal Poly, Team 29-76, Johann Spring 2010 Member of Cal Poly, Team 29-76, Johann Spring 2010

CPSU-JOHANN-S10S29G76

4 членов

Автор 30 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 3

За всё время: 3,132