Введение

The disassembly of the rear cover is simple but requires the removal of a lot of screws.

Запчасти

Никакие детали не требуются.

  1. Unscrew the 20 Phillips screws on the underside of the T42.
    • Unscrew the 20 Phillips screws on the underside of the T42.

      • For ease of reassembly, keep your screws organized.

    Добавить комментарий

  2. Spread Fixmas Cheer
    Получите $12 за покупку от $50 и выше с промокодом FIXMAS12
    Spread Fixmas Cheer
    Получите $12 за покупку от $50 и выше с промокодом FIXMAS12
  3. Unscrew the 2 Phillips screws on both sides of the T42's rear.
    • Unscrew the 2 Phillips screws on both sides of the T42's rear.

    leave these four screws alone. No need to remove them.

    fredwb - Ответить

    Of course you need to remove them you Dingbat! They are the main anchors of the screen hinges, Doh!

    wbcam -

    There are tiny numbers showing the lengths of the screws. 1-2-3-4 where 1 is the shortest.

    The dark red circles are not very easy to see. How about white ones?

    mattikaki - Ответить

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Gerald Watanabe

Участник с: 14.04.2010

198 Репутация

Автор 7 руководств

Команда

Cal Poly, Team 29-76, Johann Spring 2010 Member of Cal Poly, Team 29-76, Johann Spring 2010

CPSU-JOHANN-S10S29G76

4 членов

Автор 30 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 3

За всё время: 3,701