Введение

This guide details how to remove the internal backplate to expose the speaker, the headphone jack, and the logic board.

Запчасти

Никакие детали не требуются.

Slide the notch downward while pulling the back cover off to remove it.
  • Slide the notch downward while pulling the back cover off to remove it.

Добавить комментарий

Use your fingers to push the battery upward from the bottom.
  • Use your fingers to push the battery upward from the bottom.

  • Lift upwards to remove the battery.

Добавить комментарий

  • Unscrew the antenna in a counter-clockwise fashion.

  • Remove the aluminum cover.

Добавить комментарий

  • Unscrew the 3 screws shown.

  • Lift up the right part of the Nextel logo and unscrew the screw underneath.

Добавить комментарий

  • DO NOT force the cover off as it could damage the ribbon cable!

  • Gently lift the back cover off.

Добавить комментарий

  • Carefully pry off the connection between the headphone jack and logic board.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Grant Glazebrook

Участник с: 14.04.2010

7 Репутация

Автор 2 руководств

Команда

Cal Poly, Team 29-61, Johann Spring 2010 Member of Cal Poly, Team 29-61, Johann Spring 2010

CPSU-JOHANN-S10S29G61

4 членов

Автор 6 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 1,241