Запчасти

Никакие детали не требуются.

  1. Remove the screws from the bottom, right, and left side of camera. Remove the screws from the bottom, right, and left side of camera. Remove the screws from the bottom, right, and left side of camera.
    • Remove the screws from the bottom, right, and left side of camera.

  2. Remove the back of the camera, may require force.
    • Remove the back of the camera, may require force.

  3. Unscrew the right metal bracket of the viewing lens
    • Unscrew the right metal bracket of the viewing lens

  4. Unscrew the top right corner screw
    • Unscrew the top right corner screw

  5. Unscrew the bottom right corner screw.
    • Unscrew the bottom right corner screw.

  6. Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force. Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.
    • Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.

  7. Free shipping on all orders over 100,00 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  8. Pull the front of the camera off of the mother board. Pull the front of the camera off of the mother board.
    • Pull the front of the camera off of the mother board.

  9. Unscrew the grey plastic around the screen
    • Unscrew the grey plastic around the screen

  10. Twist the grey bracket counterclockwise to remove it from the silver LCD bracket.
    • Twist the grey bracket counterclockwise to remove it from the silver LCD bracket.

  11. Maneuver to detach the flash bulb.
    • Maneuver to detach the flash bulb.

  12. Unscrew the metal bracket under the lens
    • Unscrew the metal bracket under the lens

  13. Slide the plastic bracket through the metal bracket.
    • Slide the plastic bracket through the metal bracket.

    • Remove the orange cable from the motherboard.

  14. Pull the black tape off.
    • Pull the black tape off.

  15. Unscrew the two screws underneath.
    • Unscrew the two screws underneath.

    • Remove lens

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Crista Riedy

Участник с: 12.02.2013

406 Репутация

Автор 3 руководств

Команда

Ohio State, Team 1-2, Buehl Spring 2013 Member of Ohio State, Team 1-2, Buehl Spring 2013

OSU-BUEHL-S13S1G2

2 членов

Автор 5 руководств

Комментариев: 0

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 524